Tubular Copper Braid

Tinned copper clad aluminium is made by covering a coating of tin on the surface of copper clad aluminium wire, which is made up by using pure aluminium wire as core. It adopts the advanced coating and welding technology in the world. Plating copper concentrically on the concentric line of aluminium, realizes metallurgy combination between copper coating and aluminium. There will be no flaking off during the heat treatment or mechanical workout. The TCCA is a best new clad metal wire instead of pure copper wire. 

Special tinned copper clad aluminum magnesium alloy.

• Contains 15% copper by volume. 
• Excellent solution when high tensile strength and low weight are needed
• More pliable than pure copper, without the insulating oxide and breakage susceptibility of pure aluminum
• The weight is approximately 0.4 than regular tinned copper braid 
• Very good resistance to corrosion, even in marine applications. 
• Moderate- to high-strength, non-heat-treatable alloy
• Favorable conductivity-to-weight ratio 
• Braided according to mil-spec AA-595/ QQB- 575 construction. 
• Tubular braid made with individual ends of wire conforms to the ASTM- B566-04a specification.
• Formed to maintain coverage of 90% shielding over the nominal diameters specified. 
• Supply also as multi ends wires on bobbins for braiding machine. 

Tinned Copper Braid  in Completely Round Configuration as Shown in the table above.

Product Features: shiny & uniformity tin layer, excellent electrical conductivity, bear bending, good tensile strength, excellent welding and corrosion, with the great light specific gravity, and savings resources of copper.

MAIN APPLICATION:

Used As Both Shielding and Protective Covering.  Shielding is 95% Or More When Placed Over Equivalent Diameter Mandrel To The Inside Diameter of Tubular Braid. Flexible coaxial cable, a variety of audio and video cable, vehicle signal cable, network cable, data transmission cables and so on. Can be used in the above cables: Cable conductor, braiding and shielding, the single wire conductor and other conductors.

APPLICATION FOR TUBULAR BRAID:

Tubular braids are used for covering and shielding. They protect the cables and electrical conductors against interferences and to realise a safe data transfer.

Cable Construction:

Surface: Plain copper or Tinned.

Technical Data

Material: Annealed electrolytic grade copper wire. Wire Diameter – 0.16 to 0.3 mm.

Packing: In rings or spools or wooden drums.

Cable Design Parameters

Kindly complete the part numbers by adding the suffix (in place of ‘c’) for the conductor type required:

0 = Plain/Bare Copper, 1 = Tinned Copper.